+86 15093323284  hams@ailunce.com

Blog

How to connect Retevis RT73 to a DMR hotspot simplex

answer one customer question" how to connect Retevis RT73 to a DMR Hotspot simplex"?  ...

Read more  connect RT73 to a DMR Hotspot simplex

Raspberry Pi and AilunceHS2 can be perfectly adapted to pay FT8

use PI to use SDR+GQRX for monitoring. Coupled with its extremely low power consumption, it is really the best choice. After trying, Raspberry Pi+AilunceHS2 can be perfectly adapted to play FT8.  ...

Read more  AilunceHS2 play FT8,  Raspberry Pi and AilunceHS2

How to connect DMR repeater on Ailunce HD1 without PC

Ailunce HD1 is DMR amateur radio, which can not only program in software but also operate directly on the radio via the front panel. So how to connect the DMR repeater on HD1 without a computer? Today we will take the local repeater as an example to show the detailed setting steps of connecting the DMR repeater directly on the front panel.  ...

Read more  AilunceHD1,  DMR Repeater,  AmateurRadio

How to correctly select and install the driver of Ailunce HD1?

Ailunce HD1 is a DMR amateur radio that can be programmed in software on PC. But before installing and using the programming software, we need to install the dedicated software driver of Ailunce HD1 correctly.  ...

Read more  AilunceHD1,  Driver,  AmateurRadio

What's POTA?

POTA is short for Parks on the Air. It is a radio outdoor communication activity initiated by American Hams. The activity frequency bands include HF/UHF/VHF, etc., and the communication modes include voice, digital, CW, SSTV, etc. If you enjoy outdoor communication, you can participate in this activity by querying the NPOTA park map on Google Maps under the conditions of the operating permit.  ...

Read more  AmateurRadio,  POTA,  Outdoor

Why and where do we need the antennas combiner

Combiner is a words often mentioned by hams who uses multi-band radios, so what is a combiner? Why do we need to use a combiner? Let’s learn more about the combiner today.  ...

Read more  AmateurRadio,  Antenna,  Combiner

First acquaintance of the common balun in antennas

Balun is short for Balance To Unbalance Transformer. Balun can use to transmission between balanced and unbalanced, impedance transformation, and so on.There are current and voltage balun to select for us.  ...

Read more  Balun,  AmateurRadio,  Antenna

How to set to connect the analog repeater with Ailunce HS2?

Ailunce HS2 is a full-frequency SDR tranceiver. If there is a local analog repeater, you can connect to repeater with your Ailunce HS2. but do you know how to set it? Today we will take Zhengzhou Relay as an example to show the detail steps.  ...

Read more  AilunceHS2,  Repeater,  AmateurRadio

what programming interface of your radio?

For ham, it is very interesting to do some simple DIY to achieve some of your own special demands. Therefore, it is a simplest need to know the function of programming interface. Today we will take a look at several programming interfaces of Retevis and Ailunce.  ...

Read more  AmateurRadio,  program,  interface