+86 15093323284 hams@ailunce.com
You Deserve to Have Ailunce HS2 Shortwave HF SDR Transceiver
Ailunce HS2 is an ultra-portable full-frequency full-mode SDR radio. Receive frequency coverage 300K~1.6GHZ. The built-in network port can realize remote operation and remote firmware upgrade.
The HAM-BOX mobile app we developed allows the mobile phone to easily control and play radio stations(the app is still under development, any progress we will post on Ailunce website).
Ailunce HS2 adopts a full keyboard design, built-in Bluetooth module, sound card module, and serial communication port module. Full support for currently popular radio control software and logging software. HS2 support: N1MM, FT8, HRD, SDRNUO, Airspy. when using this SDR software only need a Type-C USB cable to connect to your computer is okay.
We are working hard to give you more playable space.
Features |
|
| 1. Real-time spectrum. | 11. Built-in FLASH memory. |
| 2. Waterfall chart. | 12. USB TYPE-C interface for power supply and computer connection. |
| 3. Doppler frequency tracking. | 13. High precision TXCO ± 0.5ppm (-10-60 ℃). |
| 4, using software-defined radio technology | 14. Ultra-wide working voltage range: 5-32VDC. |
| (SDR), full-band support SSB, CW, RTTY, AM, FM. | 15. power supply reverse connect protection. |
| 5. Double frequency conversion circuit structure. | 16. Built-in GPS / BeiDou, GSM, electronic compass (acceleration, angle sensor) (optional). |
| 6. IF width and IF shift hardware and software can be modified to provide powerful IF interference suppression. | 17. GPS time service (requires optional GPS module). |
| 7. DSP digital noise reduction. | 18. Built-in UTC clock. |
| 8. Built-in 160-6 meters high-speed automatic antenna tuner. | 19. Voltage display. |
| 9. Built-in electronic key controller, all parameters can be set flexibly. | 20. Unique LORA data transmission (requires optional LORA module). |
| 10. Built-in sound card with IQ and audio output. | 21. Ultra-lightweight: ≤1KG. |
| 22. Built-in remote operation so, remote firmware update. | |
Standard Module |
Optional Module |
| FM module | GPS module |
| Bluetooth module | LORA module |
| Bluetooth microphone | Electronic compass module |
| Built-in sound card | Wired microphone |
| Built-in automatic antenna tuner | Shortwave balcony antenna |
| Built-in memory | External frequency wheel (under development) |
Transmitter Parameters |
|
| Transmitter Architecture | SDR |
| Transmission Mode | SSB, CW, RTTY, AM, FM |
| Frequency Resolution | 1Hz |
| Transmit Frequency Range*1 | 1.800-2.000,3.500-3.900,5.351.5-5.366.5, 7.000-7.200, 10.100-10.150, 14.000-14.350, |
| 18.068-18.168,21-21.450,24.890-24.990, 28-29.7,50-54, 144-146, 430-440MHz | |
| Output Power | HF+6m:SSB(1~20W),CW(0.1~20W), |
| VHF: SSB/CW/FM(0.5~5W), FM(0.1~20W) | |
| UHF:SSB/CW/FM(0.5~5W), AM(1~5W) | |
| Power Consumption | TX:13.8V~5A |
| RX:13.8V~0.25A(Normal),0.35A(Max brightness&Highest audio) | |
| Carrier Suppression | <50db |
| Spurious Suppression | 1.8—54MHZ: ≥50db |
| 144—146MHZ: ≥60db | |
| 430—440MHZ: ≥60db | |
| Memory Channel | 999 |
Receiver Parameters |
|
| Receiver Architecture | SDR |
| Receiver Mode | SSB, CW, RTTY, AM, FM |
| Receive Frequency Range | 300KHz-1.6GHz*2 |
| IF Bandwidth | 20KHz |
| IF | 12KHz |
| Sensitivity*3 | SSB/CW:（BW: 2.4kHz @ 10dB S/N） |
| 0.18uV（1.8—54MHZ）, | |
| 0.25uV（144—146MHZ）, | |
| 0.25uV（430—440MHZ） | |
| AM:（ BW: 6kHz @ 10dB S/N） | |
| 15uV（0.3—1.8MHZ）, | |
| 2uV（1.8—54MHZ）, | |
| 2uV（144—146MHZ）, | |
| 2uV（430—440MHZ） | |
| FM:（BW: 15kHz @ 12dB S/N） | |
| 0.5uV（28.0—29.7MHZ）, | |
| 0.25uV（50—54MHZ）, | |
| 0.3uV（144—500MHZ）, | |
| 0.5uV（430—440MHZ） | |
| IF Suppression | ≥70db |
| Image Suppression | ≥80db |
| Audio Output Power | 2W (10% distortion rate, 8Ω load, 3KHZ) |
Antenna tuner parameters |
|
| Tuning frequency range | 1.8-54MHZ |
| Tuning impedance range | 16.7Ω--150Ω unbalanced (SWR is better than 1: 3) |
| Tuning accuracy | VSWR: 1: 1.5 or less |
| Tuning time | 2-5S (full segment 10S) |
| Tuning method | Automatic / Manual |
Spectrum parameters |
|
| Spectrum bandwidth | 48K |
| RF Spectrum | FFT |
| Structural parameters | |
| Size | 170X120X45mm (excluding protrusions) |
| Weight | ＜1KG |
Working voltage parameters |
|
| Voltage range | 5—32V receiving range, |
| 5-12V transmit power limit, | |
| 12-18V full power output, | |
| 18-32V transmit power limit. | |
| Antenna interface | |
| Antenna interface | TNC/BNT/M/N (optional) |
| Working environment parameters | |
| Working temperature | -10 ℃ to 60 ℃ |
| Working humidity | 10% -- 90% |
Note *1: Frequency range is different according to different countries or areas, the actual frequency by local legal provisions.
Note *2: Data retention.
Note *3: to be calibrated, the final interpretation of all manufacturers.
Comments
Giacomo Comis
Il manuale operativo non è ancora pronto?
Vivian Author
Yes, when the manual is available, we will list it on our website.
Erlend Grimseid
Hi. Is the 60m band expandable? Here in LA (Norway) we have access to a rather large band. From 5260 to 5410.
Lars SM0TGU
Hello, when do you release more information about the VHF/UHF functions of HS2?
Vivian Author
More information about the price, please check this link. https://www.ailunce.com/hs2-hf-vhf-uhf-sdr-transceiver it support connect a external amplifier.
hugues deslys
magnifique appareil
Vivian Author
Merci
Michele Langellotti
What is prise. Only 30w power? Not have 100 w hf?
Erlend Grimseid
It's it true that there will be an DMR module for this radio?
Yolanda Author
There is no DMR module, and the current HS2 don't support DMR.