+86 15093323284 hams@ailunce.com
How to Upgrade Ailunce HD1 Firmware
Ailunce HD1 is the first radio we R&D mainly for amateurs. HD1 is true-2-slot Dual Band Digital Radio, comply with MOTOTRBO Tier Ⅰ&Ⅱ. HD1 can operate many functions through radio panel, many hams are very interesting with it. and want to know how to upgrade HD1 firmware. Today, let us discuss how to upgrade HD1 firmware.
What you need to do.
1. Get one Ailunce HD1 digital radio.
2. Get one programming cable for HD1.
3. Download HD1 firmware from the official website: http://www.ailunce.com/Support/HD1/Software
Here's how to do it.
Connect your HD1 with PC use programming cable.
2. Press PTT and the first side key, turn on HD1 at the same time, enter the DFU mode.
3. Open the firmware software, Click button"Connect".
4. Click"Get Version" to get the current radio firmware version. （When you click it and get error message, we can skip this step. It is only for check your current firmware, no effect on upgrade.）
5. Then click "Update", it is going to begin updating the firmware to your HD1.
6. The firmware update successfully after several seconds.
Once all the steps are complete, power the radio off and then back on again. Now your HD1 should be good to go!
Sometimes the new firmware improves lots of functions or adds some new functions. After upgrading the firmware, you may need to initialize your HD1 to make sure all the data is compatible. Press the MENU and EXIT, turn on the radio at the same time, then select ALL to start to initialize.
We will continue to support any problems with HD1. If you have any questions about it, Just leave the message to us.
Comments
Lynn Hedspeth
1.7.7 caused it to continually reboot. I originally had 1.6.4 and tried to update to 1.7.7 directly. Backed it up to 1.7.2 and it was fine. Thinking that it just wouldn't take the upgrade across multiple upgrades, decided to try 1.7.7 again. Same symptom. Reboots constantly with no back light, and no sounds. Have to use a flashlight to tell it is rebooting. Went back to 1.7.2. Working fine again. Maybe 1.7.7 is not ready for primetime yet. I have the HD1 GPS Version.
Yolanda Author
thanks for your feedback, we will check it. 73
Adrian
I’m trying to update firmware on my hd1(gps) and keep getting a error message stating please check connection? Please help
Yolanda Author
hello, when you click what and it shows this message? and did you install the driver and did your radio is in DFU mode?
Mick
Hi Getting the same issue, can't update past V1.79
Randy
I am having the same issue. I used the software to download my codeplug, then when I tried to install the new firmware, I get an error message saying check connection. I tried a dozen times and can not update firmware. frustrating because it was easy in the past.
alex
i am having the same issues, have tried and changed multiple ports ...try boot up in DFU mode and screen stays blank with red light ontop ...firmware update says 'successfull' but everytime i try connect software comes up 'connection error check connection'. radio screen stays black now and no sound when try to power up..DFU mode is still silent with black screen and red light on top
VICENTE RAIGOSO
Hello, I have the retevis hd1 gps a year ago and I really like this radio, but after updating the new firmware it has lost ease in reception, the same in fm as dmr, please is there something that can be done thanks for helping me because I like it a lot I bought this radio with all the accessories, and now I feel very disappointed if they could help me 73 wd4vr vicente raigoso
Yolanda Author
Hello, what's your radio firmware version? Have you set any save power rata? you can email hams@ailunce.com
VICENTE RAIGOSO
Good morning Team Ailunce. Last year my original HD-1 got killed due to an interruption of data, when my hotspot received a transmission and my radio received it also. That radio is completely dead now. I had extensive contact with Yolanda on several Zoom contacts, but she was unable to resolve the issue, so I purchased a 2nd HD-1. I would like to send you my original HD-1 for service please. Please advise me where to send it, Thankyou. Vicente serial #hd11100989
Yolanda Author
Hello, where did you buy the radio. have you contact the seller for an after-sale?
Phillip
After upgrading the firmware, initialize the HD1 the otion to chose VFO or ALL is there but is no possibility to selecte the option, the radio is not responding.
Yolanda Author
hello, did you set any power-on password? try to cancel the password before initializing the radio. if still can't be solved. email hams@ailunce.com
Harry Lakhaney
Hello Loading either version of the HD1 Software FW Updater Tool makes my Norton Software report that the software has a trojan virus installed in it.. Needless to say it won't let me install the FW updater tool.
Yolanda Author
When downloading firmware/software it may show a virus, this is down to digital signing issues and is 100% safe. You can ignore it directly and put it in your computer white list.
Richard mauco
hola compre una radio ailunce HD1 GPS la radio funciona perfectamente. El tema que la radio no recibe señal GPS La e tenido al exterior para que pueda recepcinar el GPS pero nada. La compare con otro equipo de la marca TyT pensando que podía ser la cobertura pero el equipo TYY funciona perfectamente La radio ailunce se encuentra con el ultimo firmware que a sacado la marca 1,72 GPS
Yolanda Author
Hello, please make sure the GPS of current channel is open. check it on the software or radio menu list. both ok.
Richard Nauco Fuentealba
hola en el menu se encuentra activado el gps y en el canal tambien e tenido la radio por largo periodo al aire libre para la señal y no pasa nada so esta el icono del mundo y el circulo rojo
Yolanda Author
Hello, please make sure you have checked the GPS on the software or turn on the GPS in the menu list first. any other question email hams@ailunce.com
John McGennis
Good morning Team Ailunce. Last year my original HD-1 got killed due to an interruption of data, when my hotspot received a transmission and my radio received it also. That radio is completely dead now. I had extensive contact with Yolanda on several Zoom contacts, but she was unable to resolve the issue, so I purchased a 2nd HD-1. I would like to send you my original HD-1 for service please. Please advise me where to send it, Thankyou. John McGennis Serial No:1801AHD11103322
Yolanda Author
Hello, where did you buy the radio? Have you contacted your seller? Please email support@ailunce.com.
Chris
Updated to V1.71 and it bricked my radio. Loaded the previous firmware and it's working again.
Yolanda Author
Please select the right FW version, and enter into DFU mode before upgrading the radio. email hams@ailunce.com if you still have problems when upgrading the firmware. 73
Hello
I'm try to write to radio , USB drivers are ok, com port is correct but I get an error about check connection. Hell please
Yolanda Author
Have you tried to use another com port? email to us. hams@ailunce.com