For hams, the scan is a very common and practical function. With the continuous development of amateur radio, the new word scanner has appeared. So what is the scanner, and what is the difference between scan and scanner?  ...

Retevis RT23 is a U/V dual band handheld amateur radio station with dual PTT, dual display, and dual standby that supports cross-band repeater. The amateur radio allows the hams to program it. When the walkie-talkie cannot work normally due to wrong operations, we can try to restore the factory settings, also known as initialization. RT23 supports two methods to initialize it, one is shortcut key initialization, the other is software initialization.  ...

Lora is short for Long Range. It is a low-power LAN wireless standard created by Semtech company. Its biggest feature is that it can travel farther than other wireless methods under the same power consumption condition, achieving low power consumption and Long-distance unity, it is 3-5 times longer than the traditional radio frequency communication distance under the same power consumption.  ...

The radio receiver is a device used to receive radio signals. It can convert the RF signal received by the antenna into a baseband signal. Usually, we know the frequency of RF is very high but the baseband frequency is lower, so it requires the receiver to process. According to different processing ways, radio receivers can be divided into direct-emitting radio receiver amplifiers and superheterodyne receivers.  ...

Recently we received customer feedback. After trying to make RETEVIS 73 codeplug and writing into radio successfully, they received No menu item when entering the setting menu. but after trying to restore the factory, the menu shows normally. Why is this?  ...

On 5th May 1940, Chinese amateur radio operators started “On air conference”. On 5th May 1947, the conference covered all the regions in China, it was the biggest on-air event.  ...

Many antennas of amateur radios are detachable, then customers can replace the higher gain antennas to extend the communication range according to their needs. However, the non-original high-gain antenna interface can't connect to our radio directly, or the antenna is too long to directly connect horizontally, we need to choose a suitable adapter to connect them. So, how to choose the right adapter?  ...

How to program RT73 works on a digital repeater. Take RetevisRT97P as an example.  ...

Retevis RT3, RT8, RT82, RT3S, and RT90 are a  series of DMR walkie-talkies. But we may meet the same question after we programed the walkie-talkie and then turn on the radio, radio shows Unprogrammed like below picture. Why?  ...

We know AILUNCE HD1 is an FPP ham radio. It allows you to program the radio without a computer. Expect this, there are lots of little details that make you feel different from other radios.  ...