Blog

Why is your signal report of 50W radio not as good as the one just 5W radio? That's because in addition to the environmental loss, the power of the radio has a lot of loss in the antenna system. So many hams like to install them antenna outdoor to reduce antenna system loss. But what do you need to know when installing an outdoor antenna?  ...

what are electromagnetic waves? how does the antenna send these electromagnetic waves out? how does the antenna realize the directional emission of electromagnetic waves? how do you measure the coverage and gain of the antenna's main lobe? After reading the article, you will understand.  ...

wireless communication also transmits information through antennas, except that it transmits electromagnetic waves that carry useful information. The figure below is an example of mutual communication between a mobile phone and a base station.  ...

SWR is short for Standing Wave Ratio. It's a parameter often used by hams to indicate if the antenna matchs with the transmitting radio. For SWR value, it has different effects on the built-in and external antennas. so there are differnt SWR standard required for antennas with the different working environment.  ...

We got some customers feedback said they when they upgrade RT84 firmware or program, they will get an error" Excel Fail; firmware error; even no DMR users are displayed. Today I will tell you how to disappear these errors.  ...

For radio amateurs, they use Yagi Antenna to extend racio communication range. Nowdays, many amateurs use Yagi antenna to receive the signals from the satellite.  ...

A hotspot that can help you to access the talk groups when you don't have a DMR repeater nearby.  Normally hotspots are capable of multiple modes as well, such as D-Star, P25, DMR+, YSF and NXDN… but we are only going to talk about DMR here.   ...

dPMR is a different protocol than DMR. So Ailunce HD1 is not able to listen dPMR446.  ...

Calling CQ is the easiest way to get on the radio and talk to somebody if you’re not turning around the band’s looking for someone else calling CQ, you can find a clear frequency and call CQ and see if someone out there hears you.   ...

The signal report of an amateur station consists of "R" (Readability, which is the clarity of the signal) that represents the intelligibility of the signal, "S" (Strength, that is, the size of the signal) that represents the strength of the signal, and "T" (Tone) that represents the tone of the signal , That is, the tonal quality of the signal) is composed of three parts, so the signal report is often called "RST".  ...